Comments on: About https://wjowsa.com Things that may or may not be interesting. Tue, 14 Jan 2020 21:35:35 +0000 hourly 1 https://wordpress.org/?v=6.5 By: admin https://wjowsa.com/contact/comment-page-1/#comment-246639 Tue, 14 Jan 2020 21:35:35 +0000 http://www.wjowsa.com/?page_id=99#comment-246639 In reply to Kerwin Kerr.

ya I need to go through all my old hosting pics and update to the site host instead. Thanks for the heads up.

]]> By: admin https://wjowsa.com/contact/comment-page-1/#comment-246638 Tue, 14 Jan 2020 21:34:57 +0000 http://www.wjowsa.com/?page_id=99#comment-246638 In reply to Jim Brossard, Jim’s Custom Stocking Service.

I’ll post ’em if people still comment!

]]> By: Jim Brossard, Jim's Custom Stocking Service https://wjowsa.com/contact/comment-page-1/#comment-246636 Tue, 14 Jan 2020 03:08:16 +0000 http://www.wjowsa.com/?page_id=99#comment-246636 Are you still posting comments on the Radarcarve tool? I’ve been using one for a whila now and have some good tips. The most important is that most bits cut larger than their stated size. I found this out by ruining my first stock. My tip is to cut a groove in the material you are hoping to duplicate into, like walnut for me. I found that a 1/4″ router bit that I expected to cut a .25″ groove actually cut a .265″ groove. Quite a difference if you want absolute accuracy. So to overcome this, I turned a pilot out of brass to 0.266″ diameter. Did the same for the rest of the bits so that the pilot is just a little bit larger than the cut that a bit makes. I also made some square aluminum plates that I can screw to the stock being duplicated and also the blank. I then mount these through the 3/8″ holes in the rotating mounting plates. I can send pictures.

]]> By: Kerwin Kerr https://wjowsa.com/contact/comment-page-1/#comment-246297 Mon, 18 Dec 2017 13:25:34 +0000 http://www.wjowsa.com/?page_id=99#comment-246297 I just finished putting together a Frankenstein Ruger 10/22 with a heavy Ruger 20″ target barrel. I’m going to put on some iron sites. The Williams FP AG site with the target knobs is what I’m going to try and a Lyman Globe front site. Your article was very informative except some of the pix were blanked out by PhotoBucket. I don’t use them any more.

]]> By: admin https://wjowsa.com/contact/comment-page-1/#comment-243731 Wed, 26 Oct 2016 00:57:01 +0000 http://www.wjowsa.com/?page_id=99#comment-243731 In reply to William.

I forget the name of a place, but any machine tool supplier should be able to provide them.

]]> By: William https://wjowsa.com/contact/comment-page-1/#comment-243659 Tue, 18 Oct 2016 16:21:36 +0000 http://www.wjowsa.com/?page_id=99#comment-243659 Hi Garp.

A couple of questions. Can you tell me where you found that specific collect extension from the Radarcarve review? Also, wondering where you found the stylus for the long, straight Saburr Tooth burrs?

Thanks for any help.

]]> By: Erik https://wjowsa.com/contact/comment-page-1/#comment-163045 Thu, 21 May 2015 21:04:53 +0000 http://www.wjowsa.com/?page_id=99#comment-163045 Hello.
My name is Erik and I live in sweden,

I am thinking of starting a hobby gun stock shop here in my home town here in Sweden and a new duplicator cost way more than I can pay for a hobby,
I found the RADARCARVE setup for around 1500 us, and then I found your review from 2012, Is you still using it or did you get a new one?
Thank you for the anser and for the time.
//Erik

]]>